Bench Notes › Connector Encyclopedia › Audio
Connector Encyclopedia · AudioTS · ¼″
Unbalanced. Tip signal, sleeve shield.
Pin explorer
Schematic. Read the molded numbers on the real part.Plug body: tabs sit in the same order on the back; no flip needed.
| Pin | Function |
|---|---|
| T | Signal |
| S | Shield / return |
This wiring is a stop-work case at our bench. Shown for recognition only.
Printable bench card
TS · ¼″
| Unbalanced | |
|---|---|
| T | Signal |
| S | Shield / return |
Cable: One conductor plus shield. · Limits: Unbalanced; keep runs short. · productionbench.com/connectors/ts · Reviewed by Thomas Popp
Sources
- AES48
Verified against the sources above · Reviewed by Thomas Popp. Found an error? Tell us; corrections are logged on the page.
Related
Notes that use this
Would rather not solder it yourself?
Send it in. Tell us whether used, tested parts are fine or you want new, and whether you are sending connectors with it.
Start a repair Class soldering kits