Bench Notes › Connector Encyclopedia › Audio
Connector Encyclopedia · AudioTA4F · mini 4-pin (Shure bodypacks)
Lav and headset mics into Shure bodypacks. Manufacturer-specific.
Pin explorer
Schematic. Read the molded numbers on the real part.| Pin | Function |
|---|---|
| 1 | Ground |
| 2 | Bias, +5 V DC |
| 3 | Audio |
| 4 | Tied to pin 3 through a resistor (per Shure wiring guide) |
This wiring is a stop-work case at our bench. Shown for recognition only.
Printable bench card
TA4F · mini 4-pin (Shure bodypacks)
| Shure bodypack (lav, condenser) | |
|---|---|
| 1 | Ground |
| 2 | Bias, +5 V DC |
| 3 | Audio |
| 4 | Tied to pin 3 through a resistor (per Shure wiring guide) |
| Shure bodypack (instrument, dynamic) | |
| 1 | Ground |
| 2 | Bias (unused) |
| 3 | Audio |
| 4 | Jumpered to pin 3 (per Shure wiring guide) |
Cable: Lav cable, very fine conductors. Re-termination needs patience and a fine tip. · Limits: Manufacturer-specific. Verify per mic and pack. · productionbench.com/connectors/ta4f · Reviewed by Thomas Popp
Sources
- Shure · Bodypack and lav wiring guide (current revision)
Verified against the sources above · Reviewed by Thomas Popp. Found an error? Tell us; corrections are logged on the page.
Related
Notes that use this
Would rather not solder it yourself?
Send it in. Tell us whether used, tested parts are fine or you want new, and whether you are sending connectors with it.
Start a repair Class soldering kits